NATO / ZULU style 5 buckle ballistic watch strap – Bond 007 colours


A high quality ballistic nylon ZULU / NATO style watch strap in both ORIGINAL & SPECTRE James Bond colours. This original (regimental) version features 3 x navy blue stripes, two army green and a thin red piping separating each band. The modern (Spectre) version features 3 x black stripes with 2 x inner silver / grey stripes. This watch strap is available in 18mm, 20mm, 22mm and 24mm width (lug to lug) with 5 x brushed steel buckles (3 above and 2 below the watch)

SKU: N/A Category:


This is another version of the military influenced NATO / ZULU watch strap. This one comes in two popular colour schemes – Bond Regimental (red, blue and olive green) and Bond Spectre (black & silver/grey). The main difference between this one and the other NATO Bond watch strap is the style and number of buckles. This strap features FIVE smooth “round” buckles, the other version has just three and they are flat and more rectangular.

Specification of this NATO/ZULU Watch strap

  • Style – NATO strap in Bond Regimental colours (red, green, blue) & Bond Spectre colours (black & silver/grey)
  • Length (in total excluding end buckle) – 29cm / 11.5 inches
  • 13 pre-made (heat sealed) holes
  • Will fit wrists from 16cm to 22cm
  • Width – 20mm and 22mm
  • Stainless Steel Buckles – 5 smooth / round (as shown in photos – 3 above and 2 below the watch)
NATO watch straps are preferred by the military and other active outdoor types because of the ONE PIECE design. If one of the spring bars fail the watch won’t fall from the wrist. It will remain attached to the watch strap by the one remaining spring bar. If a spring bar fails on a TWO piece strap – your watch will fall to the ground

Will it fit your watch

This strap is available from 18mm to 24mm. If you don’t know the width of your lugs measure them with a ruler or even better some digital calipers. Measure from LUG to LUG – the area where the strap sits housing the spring bars.

Important – FITTING instructions

Where the gap between the spring bar and watch case is LESS than 1.5mm (about the thickness of the strap) it may be necessary to remove the spring bars before fitting the strap. Normally simply slide the strap under the two spring bars. If the gap is too tight you may have to remove the spring bars to fit the new strap. FORCING the strap between the gap may damage the heat sealed holes. If in any doubt REMOVE the spring bars first. If the strap slides in without too much resitance that’s fine just pull it slowly through.

NOTE – for customers outside the UK please use our INTERNATIONAL shipping option on our eBay site. We can ship to most of Europe, USA, Canada, Australia etc.

Additional information

Weight0.2 g

Regimental (red, blue, green), Spectre (black & grey)


18mm, 20mm, 22mm, 24mm


There are no reviews yet.

Be the first to review “NATO / ZULU style 5 buckle ballistic watch strap – Bond 007 colours”

Your email address will not be published. Required fields are marked *

You may also like…